|
|
here is full log include SPI boot and eMMC update -> boot fail.
some times(power on/off 10~20times) boot few second, but system hang up.
see the log.
Thanks
SON
boot error_211021.txt (92,952 bytes)
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MtHsmz
: releasRKeE iK_dI 0D xd(b9yc9te2[007,: 7]co)m =mi t5c tai10me0 00We00d 0A00pr5 3d24
1U3LT:1 7(b:5yt5 e2[001:97] -)0 7 0 0 =
4b949fa690c9483d
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_AMP_power, i2c_master_write_and_read fail.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.178 (jim@vas-build-58) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Thu Oct 14 01:39:35 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] MAX DMA PHYS limited to 2048MB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064
[ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=SKBFXYW11JLB androidboot.deviceid=BFX-UA300_2020_000001341 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=b73d9f088603871a778fe33aac669094f75b1a818804d15862c9d689ac48efca androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=a8:93:4a:fe:7c:13 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=normal_boot chipi
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13652(83%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB)
[ 0.000000] Memory: 2026916K/2592768K available (9662K kernel code, 1070K rwdata, 3316K rodata, 2432K init, 482K bss, 565852K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB)
[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3392 KB)
[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB)
[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB)
[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual)
[ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000538] Console: colour dummy device 80x25
[ 0.000558] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000570] pid_max: default: 32768 minimum: 301
[ 0.000645] Security Framework initialized
[ 0.000653] SELinux: Initializing.
[ 0.000711] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000720] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001636] sched-energy: CPU device node has no sched-energy-costs
[ 0.001646] Invalid sched_group_energy for CPU0
[ 0.001652] CPU0: update cpu_capacity 1024
[ 0.029952] ASID allocator initialised with 65536 entries
[ 0.200220] Detected VIPT I-cache on CPU1
[ 0.200258] Invalid sched_group_energy for CPU1
[ 0.200261] CPU1: update cpu_capacity 1024
[ 0.200265] CPU1: Booted secondary processor [410fd034]
[ 0.280293] Detected VIPT I-cache on CPU2
[ 0.280320] Invalid sched_group_energy for CPU2
[ 0.280323] CPU2: update cpu_capacity 1024
[ 0.280326] CPU2: Booted secondary processor [410fd034]
[ 0.360375] Detected VIPT I-cache on CPU3
[ 0.360402] Invalid sched_group_energy for CPU3
[ 0.360405] CPU3: update cpu_capacity 1024
[ 0.360408] CPU3: Booted secondary processor [410fd034]
[ 0.360487] Brought up 4 CPUs
[ 0.360525] SMP: Total of 4 processors activated.
[ 0.360534] CPU features: detected feature: 32-bit EL0 Support
[ 0.360546] CPU: All CPU(s) started at EL2
[ 0.360568] alternatives: patching kernel code
[ 0.360718] Invalid sched_group_energy for Cluster3
[ 0.360726] CPU3: update max cpu_capacity 1024
[ 0.360732] Invalid sched_group_energy for Cluster2
[ 0.360738] Invalid sched_group_energy for Cluster1
[ 0.360744] Invalid sched_group_energy for Cluster0
[ 0.370311] CPU1: update max cpu_capacity 1024
[ 0.370510] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370525] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370672] pinctrl core: initialized pinctrl subsystem
[ 0.371386] NET: Registered protocol family 16
[ 0.400377] cpuidle: using governor menu
[ 0.400642] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.400653] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.400844] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.450988] SCSI subsystem initialized
[ 0.451187] usbcore: registered new interface driver usbfs
[ 0.451239] usbcore: registered new interface driver hub
[ 0.451298] usbcore: registered new device driver usb
[ 0.452349] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe
[ 0.452381] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe
[ 0.452418] Linux video capture interface: v2.00
[ 0.452633] Marvell Berlin ION information
[ 0.452643] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36]
[ 0.452651] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a]
[ 0.452659] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d]
[ 0.452667] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000]
[ 0.452673] berlin found 1 secure heap
[ 0.452679] berlin found secure heap[0] head_id[2]
[ 0.544347] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544832] Bluetooth: Core ver 2.22
[ 0.544866] NET: Registered protocol family 31
[ 0.544872] Bluetooth: HCI device and connection manager initialized
[ 0.544884] Bluetooth: HCI socket layer initialized
[ 0.544895] Bluetooth: L2CAP socket layer initialized
[ 0.544926] Bluetooth: SCO socket layer initialized
[ 0.545678] clocksource: Switched to clocksource arch_sys_counter
[ 0.600948] VFS: Disk quotas dquot_6.6.0
[ 0.601013] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606174] NET: Registered protocol family 2
[ 0.645781] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.646088] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.646726] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.646794] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.646907] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.647136] NET: Registered protocol family 1
[ 0.647394] Trying to unpack rootfs image as initramfs...
[ 0.682049] Freeing initrd memory: 752K
[ 0.682594] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684838] audit: initializing netlink subsys (disabled)
[ 0.684898] audit: type=2000 audit(1234567890.670:1): initialized
[ 0.685482] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.692475] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.692649] Registering sdcardfs 0.1
[ 0.692897] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.693100] fuse init (API version 7.26)
[ 0.698022] io scheduler noop registered
[ 0.698030] io scheduler deadline registered (default)
[ 0.698150] io scheduler cfq registered
[ 0.704969] GPIO line 359 (phy0_reset) hogged as output/high
[ 0.723023] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0
[ 0.723773] tz_logger_dev: created 128K log 'tzlogger'
[ 0.723785] MV_VPP_InitMode:Normal mode, ta_flag:0
[ 0.724096] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.724823] console [ttyS0] disabled
[ 0.724870] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A
[ 1.655919] console [ttyS0] enabled
[ 1.659965] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A
[ 1.669204] [drm] Initialized
[ 1.731217] brd: module loaded
[ 1.803718] loop: module loaded
[ 1.817543] zram: Added device: zram0
[ 1.821799] libphy: Fixed MDIO Bus: probed
[ 1.826453] tun: Universal TUN/TAP device driver, 1.6
[ 1.831670] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.839764] Network controller revision: 0010
[ 1.845436] mvneta f7b60000.ethernet eth0: Using random mac address de:de:cf:4b:82:07
[ 1.853757] libphy: orion_mdio_bus: probed
[ 1.858589] fxc **** rtl8211f_probe enter
[ 1.862790] PPP generic driver version 2.4.2
[ 1.867304] PPP BSD Compression module registered
[ 1.872162] PPP Deflate Compression module registered
[ 1.877408] PPP MPPE Compression module registered
[ 1.882357] NET: Registered protocol family 24
[ 1.886956] PPTP driver version 0.8.5
[ 1.891048] usbcore: registered new interface driver r8152
[ 1.896773] usbcore: registered new interface driver asix
[ 1.902395] usbcore: registered new interface driver ax88179_178a
[ 1.908734] usbcore: registered new interface driver cdc_ether
[ 1.914793] usbcore: registered new interface driver net1080
[ 1.920687] usbcore: registered new interface driver cdc_subset
[ 1.926864] usbcore: registered new interface driver cdc_ncm
[ 1.932707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.939866] usbcore: registered new interface driver usb-storage
[ 1.946261] ci_hdrc_usb2_probe---------------61 probe start
[ 1.953121] input: Infra-Red as /devices/virtual/input/input0
[ [ 3 27 21]I.(SM9)5: 9**2*8**3**]I R uresadbyc**or**e*:** *r
egistered new interface driver xpad
[ 1.968585] usbcore: registered new interface driver usb_acecad
[ 1.974733] usbcore: registered new interface driver aiptek
[ 1.980535] usbcore: registered new interface driver gtco
[ 1.986157] usbcore: registered new interface driver hanwang
[ 1.992039] usbcore: registered new interface driver kbtab
[ 1.997777] i2c /dev entries driver
[ 2.001620] usbcore: registered new interface driver uvcvideo
[ 2.007568] USB Video Class driver (1.1.1)
[ 2.011799] gspca_main: v2.14.0 registered
[ 2.016482] device-mapper: uevent: version 1.0.3
[ 2.021442] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.030277] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d
[ 2.042770] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0
[ 2.049253] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1
[ 2.056719] rtk_btusb: Register usb char device interface for BT driver
[ 2.063692] usbcore: registered new interface driver rtk_btusb
[ 2.070385] sdhci: Secure Digital Host Controller Interface driver
[ 2.076816] sdhci: Copyright(c) Pierre Ossman
[ 2.081446] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.145757] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA
[ 2.153600] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.164555] usbcore: registered new interface driver usbhid
[ 2.170394] usbhid: USB HID core driver
[ 2.174539] ashmem: initialized
[ 2.178291] usbcore: registered new interface driver snd-usb-audio
[ 2.186012] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)!
[ 2.196191] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.204547] register card failed (-517)
[ 2.208591] snd_bt_init
[ 2.211196] u32 classifier
[ 2.213993] Actions configured
[ 2.217523] Netfilter messages via NETLINK v0.30.
[ 2.222615] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.228961] mmc0: new HS400 MMC card at address 0001
[ 2.229051] ctnetlink v0.93: registering with nfnetlink.
[ 2.229337] xt_time: kernel timezone is -0000
[ 2.229452] gre: GRE over IPv4 demultiplexor driver
[ 2.229455] IPv4 over IPsec tunneling driver
[ 2.229996] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.230203] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.230235] Initializing XFRM netlink socket
[ 2.230248] IPsec XFRM device driver
[ 2.230666] NET: Registered protocol family 10
[ 2.231799] mip6: Mobile IPv6
[ 2.231816] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.232492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.233480] NET: Registered protocol family 17
[ 2.233498] NET: Registered protocol family 15
[ 2.233519] l2tp_core: L2TP core driver, V2.0
[ 2.233527] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.234095] Registered cp15_barrier emulation handler
[ 2.234145] Registered setend emulation handler
[ 2.234507] registered taskstats version 1
[ 2.254129] Key type encrypted registered
[ 2.254142] FB: VPP init mode status failed!
[ 2.266622] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.266646] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1
[ 2.266798] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
[ 2.266837] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000
[ 2.266995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.267001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.267007] usb usb1: Product: xHCI Host Controller
[ 2.267012] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.267016] usb usb1: SerialNumber: f7a20000.xhci
[ 2.267412] hub 1-0:1.0: USB hub found
[ 2.267443] hub 1-0:1.0: 1 port detected
[ 2.267715] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.267727] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2
[ 2.267796] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.267904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.267910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.267915] usb usb2: Product: xHCI Host Controller
[ 2.267920] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.267925] usb usb2: SerialNumber: f7a20000.xhci
[ 2.268299] hub 2-0:1.0: USB hub found
[ 2.268326] hub 2-0:1.0: 1 port detected
[ 2.268713] ci_hdrc_usb2_probe---------------61 probe start
[ 2.271908] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.271921] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
[ 2.295749] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.295892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.295898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.295903] usb usb3: Product: EHCI Host Controller
[ 2.295908] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd
[ 2.295913] usb usb3: SerialNumber: ci_hdrc.0
[ 2.296286] hub 3-0:1.0: USB hub found
[ 2.296314] hub 3-0:1.0: 1 port detected
[ 2.296686] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset
[ 2.296697] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output
[ 2.298063] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.298067] register card failed (-517)
[ 2.298843] ALSA device list:
[ 2.298845] No soundcards found.
[ 2.553670] ttyS0 - failed to request DMA
[ 2.553899] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.554040] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.569195] Freeing unused kernel memory: 2432K
[ 2.575712] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.582001] init: init first stage started!
[ 2.582005] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
[ 2.583576] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[ 2.585645] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.585648] register card failed (-517)
[ 2.614715] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.622888] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.625731] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.660615] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0
[ 2.689698] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[ 2.699020] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2
[ 2.707893] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata
[ 2.716285] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.730107] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.741383] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image)
[ 2.762306] EXT4-fs (mmcblk0p20): recovery complete
[ 2.767802] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard
[ 2.790989] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.797343] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.797346] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.797349] usb 1-1: Product: USB2.0 Hub
[ 2.798005] hub 1-1:1.0: USB hub found
[ 2.798350] hub 1-1:1.0: 3 ports detected
[ 2.800204] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.800206] register card failed (-517)
[ 2.835672] random: fast init done
[ 2.846757] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.856416] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.871205] init: 16 output lines suppressed due to ratelimiting
[ 2.880777] random: init: uninitialized urandom read (40 bytes read)
[ 2.959547] random: init: uninitialized urandom read (40 bytes read)
[ 2.974360] init: Loading SELinux policy
[ 3.090437] audit: type=1403 audit(1234567893.080:2): policy loaded auid=4294967295 ses=4294967295
[ 3.099972] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 3.099972]
[ 3.110361] audit: type=1404 audit(1234567893.100:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.120952] usb 1-1.2: new full-speed USB device number 3 using xhci-hcd
[ 3.160725] selinux: SELinux: Loaded file_contexts
[ 3.160725]
[ 3.170988] random: init: uninitialized urandom read (40 bytes read)
[ 3.210984] init: init second stage started!
[ 3.239827] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.252373] selinux: SELinux: Loaded file_contexts
[ 3.252373]
[ 3.258900] init: Running restorecon...
[ 3.263883] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8771
[ 3.270997] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.277419] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.277419]
[ 3.277440] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.277565] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.277565]
[ 3.277579] init: Do not have permissions to set 'ro.product.firmware_version' to '19.531.21' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.278687] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 3.278715] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 3.365280] usb 1-1.2: Product: Bluetooth Radio
[ 3.370007] usb 1-1.2: Manufacturer: Realtek
[ 3.374425] usb 1-1.2: SerialNumber: 00E04C239987
[ 3.380098] rtk_btusb: btusb_probe: usb_interface (ptrval), bInterfaceNumber 0, idVendor 0x0bda, idProduct 0x0000
[ 3.391469] rtk_btusb: get_fw_table_entry: Product id = 0x8771, fw table entry size 62
[ 3.399673] rtk_btusb: firmware_info_init: Auto suspend is disabled
[ 3.406167] rtk_btusb: btusb_probe: Check bt reset flag 0
[ 3.411744] rtk_btusb: load_firmware_info: Default lmp version = 0x8761, fw file name[rtl8761b_fw]
[ 3.418120] ueventd: ueventd started!
[ 3.422000] selinux: SELinux: Loaded file_contexts
[ 3.422000]
[ 3.422149] ueventd: Parsing file /ueventd.rc...
[ 3.422803] ueventd: Parsing file /vendor/ueventd.rc...
[ 3.423425] ueventd: Parsing file /odm/ueventd.rc...
[ 3.423450] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 3.423469] ueventd: Parsing file /ueventd.sequoia.rc...
[ 3.423490] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory
[ 3.425256] apexd: Bootstrap subcommand detected
[ 3.429448] apexd: Scanning /system/apex for embedded keys
[ 3.430291] apexd: Scanning /product/apex for embedded keys
[ 3.430391] apexd: ... does not exist. Skipping
[ 3.430497] apexd: Scanning /system/apex looking for APEX packages.
[ 3.430642] apexd: Found /system/apex/com.android.conscrypt
[ 3.430837] apexd: Skipped when bootstrapping
[ 3.430937] apexd: Found /system/apex/com.android.media
[ 3.431123] apexd: Skipped when bootstrapping
[ 3.431220] apexd: Found /system/apex/com.android.resolv
[ 3.434095] apexd: 9 output lines suppressed due to ratelimiting
[ 3.443844] audit: type=1400 audit(1234567893.430:4): avc: denied { write } for pid=170 comm="init" name="panic_on_oops" dev="proc" ino=8291 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0
[ 3.444778] audit: type=1400 audit(1234567893.430:5): avc: denied { write } for pid=170 comm="init" name="hung_task_timeout_secs" dev="proc" ino=8294 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0
[ 3.552505] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.552508] register card failed (-517)
[ 3.588324] [amp_driver] register cdev device major [246]
[ 3.588327] [amp_driver] setup cdevs device minor [0]
[ 3.588399] [amp_driver] create device sysfs [ampcore]
[ 3.588403] [amp_driver] amp_device_init ok
[ 3.588545] [amp_driver] amp_probe OK
[ 3.588711] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.588713] register card failed (-517)
[ 3.597495] ueventd: Coldboot took 0.173 seconds
[ 3.610866] [tsp kernel driver] register cdev device major [245]
[ 3.610870] [tsp kernel driver] setup cdevs device minor [0]
[ 3.610943] [tsp kernel driver] create device sysfs [tsp]
[ 3.610944] [tsp kernel driver] tsp_device_init ok
[ 3.610945] [tsp kernel driver] berlin_tsp_probe OK
[ 3.611114] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.611116] register card failed (-517)
[ 3.622767] Registered swp emulation handler
[ 3.643089] file system registered
[ 3.644028] [vpu kernel driver] vpu probe enter
[ 3.644031] [vpu kernel driver] find vpu device h1
[ 3.644056] [vpu kernel driver] request irq:18
[ 3.644060] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff]
[ 3.644172] [vpu kernel driver] vpu:h1 probe ok
[ 3.644340] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.644343] register card failed (-517)
[ 3.644378] [vpu kernel driver] vpu probe enter
[ 3.644381] [vpu kernel driver] find vpu device vxg
[ 3.644388] [vpu kernel driver] request irq:19
[ 3.644390] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff]
[ 3.644455] [vpu kernel driver] vpu:vxg probe ok
[ 3.644542] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.644544] register card failed (-517)
[ 3.678013] [zsp kernel driver] zsp probe enter
[ 3.678040] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff]
[ 3.678147] [zsp kernel driver] zsp:zsp probe ok
[ 3.678352] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.678354] register card failed (-517)
[ 3.689976] logd.auditd: start
[ 3.689991] logd.klogd: 3684316440
[ 3.705582] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts:
[ 3.708657] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 3.716418] EXT4-fs (mmcblk0p21): recovery complete
[ 3.717311] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 3.827273] rtk_btusb: load_firmware_info: epatch_buf = vmalloc(fw->size, GFP_KERNEL)
[ 3.886128] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 3.886128]
[ 3.892347] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 3.892347]
[ 3.900079] e2fsck: Pass 2: Checking directory structure
[ 3.900079]
[ 3.907103] e2fsck: Pass 3: Checking directory connectivity
[ 3.907103]
[ 3.914384] e2fsck: Pass 4: Checking reference counts
[ 3.914384]
[ 3.921138] e2fsck: Pass 5: Checking group summary information
[ 3.921138]
[ 3.928686] e2fsck: /dev/block/by-name/cache: 14/62976 files (0.0% non-contiguous), 8221/251904 blocks
[ 3.928686]
[ 3.942192] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
[ 3.951562] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 3.969403] EXT4-fs (mmcblk0p22): recovery complete
[ 3.974903] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.075356] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.075356]
[ 4.081624] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.081624]
[ 4.089210] e2fsck: Pass 2: Checking directory structure
[ 4.089210]
[ 4.097162] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.106551] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 4.127577] init: 4 output lines suppressed due to ratelimiting
DRM_Configure gKMVersion[=0x4])
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
TA_CloseSessionEntryPoint
TA_DestroyEntryPoint
nick_id=7C13
nick_prefix=UA300_
mkfifo: /data/vendor/ledd_fifo: File exists
Offline buffer address for plane 0 are 0x65308000, 0x658f7000,
All Planes are closed. cpcb0_ctrl2 = 0x40
console:/ $ TZ WARNING[TEE_TARegister:53] the TA (AAC) has been registered
[ 8791]CEC(SM): ----------SMCEC2SM: received cec msg:id=1----------
[ 8797]I(SM): Got Appready packet from SoC CEC: 01 00 00 00 01 00 00 00
[ 8805]I(SM): SM CEC:pcBody[4]=0x1.
[ 8809]I(SM): SMCEC2SM: sending launch req to SOC: 06 00 00 00
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
RKEK_ID (byte[0:7]ts) m=: 5rcela1e0a0s0e 00i0d 0000xd539cd
92U07LT, (cobmytmiet[0 t:i7m]e) W e d =Ap 4rb 29449 1fa36:9107:c9545 832d01
9 C-hi07p0 v0er
sion = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_AMP_power, i2c_master_write_and_read fail.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
RKEK_IDts m(:b ytreel[0ea:7se] ) id= 50xcda910c092000070,0 c00o5mm3di
t UtiLTm e (bWyedte [Ap0:r 7]2)4 1 3 : 17= :455b9 4209f1a96 -900c709048
3d
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_AMP_power, i2c_master_write_and_read fail.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.178 (jim@vas-build-58) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Thu Oct 14 01:39:35 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] MAX DMA PHYS limited to 2048MB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064
[ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=SKBFXYW11JLB androidboot.deviceid=BFX-UA300_2020_000001341 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=b73d9f088603871a778fe33aac669094f75b1a818804d15862c9d689ac48efca androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=a8:93:4a:fe:7c:13 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=normal_boot chipi
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13652(83%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB)
[ 0.000000] Memory: 2026916K/2592768K available (9662K kernel code, 1070K rwdata, 3316K rodata, 2432K init, 482K bss, 565852K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB)
[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3392 KB)
[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB)
[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB)
[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual)
[ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000541] Console: colour dummy device 80x25
[ 0.000560] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000572] pid_max: default: 32768 minimum: 301
[ 0.000647] Security Framework initialized
[ 0.000655] SELinux: Initializing.
[ 0.000713] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000722] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001637] sched-energy: CPU device node has no sched-energy-costs
[ 0.001646] Invalid sched_group_energy for CPU0
[ 0.001652] CPU0: update cpu_capacity 1024
[ 0.029952] ASID allocator initialised with 65536 entries
[ 0.200224] Detected VIPT I-cache on CPU1
[ 0.200260] Invalid sched_group_energy for CPU1
[ 0.200263] CPU1: update cpu_capacity 1024
[ 0.200266] CPU1: Booted secondary processor [410fd034]
[ 0.280292] Detected VIPT I-cache on CPU2
[ 0.280320] Invalid sched_group_energy for CPU2
[ 0.280323] CPU2: update cpu_capacity 1024
[ 0.280326] CPU2: Booted secondary processor [410fd034]
[ 0.360376] Detected VIPT I-cache on CPU3
[ 0.360402] Invalid sched_group_energy for CPU3
[ 0.360405] CPU3: update cpu_capacity 1024
[ 0.360408] CPU3: Booted secondary processor [410fd034]
[ 0.360488] Brought up 4 CPUs
[ 0.360526] SMP: Total of 4 processors activated.
[ 0.360536] CPU features: detected feature: 32-bit EL0 Support
[ 0.360547] CPU: All CPU(s) started at EL2
[ 0.360569] alternatives: patching kernel code
[ 0.360718] Invalid sched_group_energy for Cluster3
[ 0.360726] CPU3: update max cpu_capacity 1024
[ 0.360732] Invalid sched_group_energy for Cluster2
[ 0.360738] Invalid sched_group_energy for Cluster1
[ 0.360744] Invalid sched_group_energy for Cluster0
[ 0.370314] CPU1: update max cpu_capacity 1024
[ 0.370511] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370526] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370671] pinctrl core: initialized pinctrl subsystem
[ 0.371396] NET: Registered protocol family 16
[ 0.400376] cpuidle: using governor menu
[ 0.400642] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.400652] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.400844] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.450987] SCSI subsystem initialized
[ 0.451184] usbcore: registered new interface driver usbfs
[ 0.451236] usbcore: registered new interface driver hub
[ 0.451295] usbcore: registered new device driver usb
[ 0.452349] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe
[ 0.452379] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe
[ 0.452417] Linux video capture interface: v2.00
[ 0.452632] Marvell Berlin ION information
[ 0.452641] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36]
[ 0.452650] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a]
[ 0.452658] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d]
[ 0.452666] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000]
[ 0.452672] berlin found 1 secure heap
[ 0.452678] berlin found secure heap[0] head_id[2]
[ 0.544341] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544825] Bluetooth: Core ver 2.22
[ 0.544859] NET: Registered protocol family 31
[ 0.544866] Bluetooth: HCI device and connection manager initialized
[ 0.544877] Bluetooth: HCI socket layer initialized
[ 0.544887] Bluetooth: L2CAP socket layer initialized
[ 0.544918] Bluetooth: SCO socket layer initialized
[ 0.545672] clocksource: Switched to clocksource arch_sys_counter
[ 0.600995] VFS: Disk quotas dquot_6.6.0
[ 0.601060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606220] NET: Registered protocol family 2
[ 0.645774] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.646081] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.646720] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.646789] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.646902] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.647131] NET: Registered protocol family 1
[ 0.647388] Trying to unpack rootfs image as initramfs...
[ 0.682042] Freeing initrd memory: 752K
[ 0.682590] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684813] audit: initializing netlink subsys (disabled)
[ 0.684873] audit: type=2000 audit(1234567890.670:1): initialized
[ 0.685455] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.692406] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.692579] Registering sdcardfs 0.1
[ 0.692831] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.693035] fuse init (API version 7.26)
[ 0.697943] io scheduler noop registered
[ 0.697951] io scheduler deadline registered (default)
[ 0.698070] io scheduler cfq registered
[ 0.704898] GPIO line 359 (phy0_reset) hogged as output/high
[ 0.723075] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0
[ 0.723824] tz_logger_dev: created 128K log 'tzlogger'
[ 0.723836] MV_VPP_InitMode:Normal mode, ta_flag:0
[ 0.724146] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.724870] console [ttyS0] disabled
[ 0.724919] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A
[ 1.655961] console [ttyS0] enabled
[ 1.660008] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A
[ 1.669245] [drm] Initialized
[ 1.741459] brd: module loaded
[ 1.774019] loop: module loaded
[ 1.777794] zram: Added device: zram0
[ 1.782064] libphy: Fixed MDIO Bus: probed
[ 1.786724] tun: Universal TUN/TAP device driver, 1.6
[ 1.791941] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.800038] Network controller revision: 0010
[ 1.805721] mvneta f7b60000.ethernet eth0: Using random mac address f2:83:a6:34:9e:10
[ 1.814025] libphy: orion_mdio_bus: probed
[ 1.828876] fxc **** rtl8211f_probe enter
[ 1.833075] PPP generic driver version 2.4.2
[ 1.837591] PPP BSD Compression module registered
[ 1.842449] PPP Deflate Compression module registered
[ 1.847694] PPP MPPE Compression module registered
[ 1.852643] NET: Registered protocol family 24
[ 1.857241] PPTP driver version 0.8.5
[ 1.861332] usbcore: registered new interface driver r8152
[ 1.867059] usbcore: registered new interface driver asix
[ 1.872679] usbcore: registered new interface driver ax88179_178a
[ 1.879019] usbcore: registered new interface driver cdc_ether
[ 1.885077] usbcore: registered new interface driver net1080
[ 1.890969] usbcore: registered new interface driver cdc_subset
[ 1.897149] usbcore: registered new interface driver cdc_ncm
[ 1.902995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.910160] usbcore: registered new interface driver usb-storage
[ 1.916556] ci_hdrc_usb2_probe---------------61 probe start
[ 1.923422] input: Infra-Red as /devices/virtual/input/input0
[[ 3 124.39]2I(9S5M)9: 0**]* **u*s*IbRc oreraedy:* r*e**g**i*s*
tered new interface driver xpad
[ 1.938978] usbcore: registered new interface driver usb_acecad
[ 1.945125] usbcore: registered new interface driver aiptek
[ 1.950927] usbcore: registered new interface driver gtco
[ 1.956548] usbcore: registered new interface driver hanwang
[ 1.962426] usbcore: registered new interface driver kbtab
[ 1.968169] i2c /dev entries driver
[ 1.972009] usbcore: registered new interface driver uvcvideo
[ 1.977956] USB Video Class driver (1.1.1)
[ 1.982186] gspca_main: v2.14.0 registered
[ 1.986851] device-mapper: uevent: version 1.0.3
[ 1.991821] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.000773] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d
[ 2.013262] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0
[ 2.019743] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1
[ 2.027212] rtk_btusb: Register usb char device interface for BT driver
[ 2.034171] usbcore: registered new interface driver rtk_btusb
[ 2.040867] sdhci: Secure Digital Host Controller Interface driver
[ 2.047262] sdhci: Copyright(c) Pierre Ossman
[ 2.051863] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.115697] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA
[ 2.125564] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.134498] usbcore: registered new interface driver usbhid
[ 2.140294] usbhid: USB HID core driver
[ 2.146482] ashmem: initialized
[ 2.151257] usbcore: registered new interface driver snd-usb-audio
[ 2.158979] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)!
[ 2.169162] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.177550] register card failed (-517)
[ 2.181601] snd_bt_init
[ 2.184208] u32 classifier
[ 2.187043] Actions configured
[ 2.190580] Netfilter messages via NETLINK v0.30.
[ 2.195704] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.202156] ctnetlink v0.93: registering with nfnetlink.
[ 2.207935] xt_time: kernel timezone is -0000
[ 2.212547] gre: GRE over IPv4 demultiplexor driver
[ 2.217627] IPv4 over IPsec tunneling driver
[ 2.222619] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.228359] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.234295] Initializing XFRM netlink socket
[ 2.238813] IPsec XFRM device driver
[ 2.242976] NET: Registered protocol family 10
[ 2.248765] mip6: Mobile IPv6
[ 2.250209] mmc0: new HS400 MMC card at address 0001
[ 2.250733] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.260996] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.261295] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.271502] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
[ 2.274081] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[ 2.289662] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.295981] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.303101] NET: Registered protocol family 17
[ 2.307720] NET: Registered protocol family 15
[ 2.312329] l2tp_core: L2TP core driver, V2.0
[ 2.316851] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.322128] Registered cp15_barrier emulation handler
[ 2.327409] Registered setend emulation handler
[ 2.332474] registered taskstats version 1
[ 2.338509] Key type encrypted registered
[ 2.342661] FB: VPP init mode status failed!
[ 2.359304] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.364816] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1
[ 2.372700] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
[ 2.381561] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000
[ 2.387662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.394676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.402151] usb usb1: Product: xHCI Host Controller
[ 2.407202] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.412867] usb usb1: SerialNumber: f7a20000.xhci
[ 2.418129] hub 1-0:1.0: USB hub found
[ 2.422030] hub 1-0:1.0: 1 port detected
[ 2.426370] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.431868] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2
[ 2.439674] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.448149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.455163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.462634] usb usb2: Product: xHCI Host Controller
[ 2.467684] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.473350] usb usb2: SerialNumber: f7a20000.xhci
[ 2.478588] hub 2-0:1.0: USB hub found
[ 2.482486] hub 2-0:1.0: 1 port detected
[ 2.486948] ci_hdrc_usb2_probe---------------61 probe start
[ 2.496031] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.501082] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
[ 2.535739] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.541452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.548482] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.555952] usb usb3: Product: EHCI Host Controller
[ 2.560992] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd
[ 2.566669] usb usb3: SerialNumber: ci_hdrc.0
[ 2.571538] hub 3-0:1.0: USB hub found
[ 2.575437] hub 3-0:1.0: 1 port detected
[ 2.579878] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset
[ 2.587177] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output
[ 2.595572] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.604015] register card failed (-517)
[ 2.608796] ALSA device list:
[ 2.611861] No soundcards found.
[ 2.615486] ttyS0 - failed to request DMA
[ 2.620215] Freeing unused kernel memory: 2432K
[ 2.629022] init: init first stage started!
[ 2.633632] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.641791] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.682447] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0
[ 2.711451] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[ 2.720568] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2
[ 2.729486] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata
[ 2.737707] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.751534] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.762812] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image)
[ 2.777232] EXT4-fs (mmcblk0p20): recovery complete
[ 2.782272] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard
[ 2.805207] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.818102] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.827627] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.835471] random: fast init done
[ 2.845436] init: 16 output lines suppressed due to ratelimiting
[ 2.854722] random: init: uninitialized urandom read (40 bytes read)
[ 2.885699] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.937771] random: init: uninitialized urandom read (40 bytes read)
[ 2.951461] init: Loading SELinux policy
[ 3.057059] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.060481] audit: type=1403 audit(1234567893.050:2): policy loaded auid=4294967295 ses=4294967295
[ 3.060675] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 3.060675]
[ 3.061077] audit: type=1404 audit(1234567893.050:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.093767] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.101142] usb 1-1: Product: USB2.0 Hub
[ 3.105766] hub 1-1:1.0: USB hub found
[ 3.109951] hub 1-1:1.0: 3 ports detected
[ 3.115569] selinux: SELinux: Loaded file_contexts
[ 3.115569]
[ 3.115879] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.115881] register card failed (-517)
[ 3.138148] random: init: uninitialized urandom read (40 bytes read)
[ 3.177736] init: init second stage started!
[ 3.206316] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.218787] selinux: SELinux: Loaded file_contexts
[ 3.218787]
[ 3.225276] init: Running restorecon...
[ 3.243576] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.243576]
[ 3.258890] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.273641] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.273641]
[ 3.288949] init: Do not have permissions to set 'ro.product.firmware_version' to '19.531.21' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.305219] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 3.318727] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 3.435726] usb 1-1.2: new full-speed USB device number 3 using xhci-hcd
[ 3.470602] ueventd: ueventd started!
[ 3.478361] selinux: SELinux: Loaded file_contexts
[ 3.478361]
[ 3.484005] apexd: Bootstrap subcommand detected
[ 3.488242] apexd: Scanning /system/apex for embedded keys
[ 3.489070] apexd: Scanning /product/apex for embedded keys
[ 3.489165] apexd: ... does not exist. Skipping
[ 3.489259] apexd: Scanning /system/apex looking for APEX packages.
[ 3.489404] apexd: Found /system/apex/com.android.conscrypt
[ 3.489594] apexd: Skipped when bootstrapping
[ 3.489691] apexd: Found /system/apex/com.android.media
[ 3.489879] apexd: Skipped when bootstrapping
[ 3.489975] apexd: Found /system/apex/com.android.resolv
[ 3.492954] apexd: 9 output lines suppressed due to ratelimiting
[ 3.502505] audit: type=1400 audit(1234567893.490:4): avc: denied { write } for pid=171 comm="init" name="panic_on_oops" dev="proc" ino=9218 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0
[ 3.503418] audit: type=1400 audit(1234567893.490:5): avc: denied { write } for pid=171 comm="init" name="hung_task_timeout_secs" dev="proc" ino=9221 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0
[ 3.566526] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8771
[ 3.566530] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.566533] usb 1-1.2: Product: Bluetooth Radio
[ 3.566536] usb 1-1.2: Manufacturer: Realtek
[ 3.566538] usb 1-1.2: SerialNumber: 00E04C239987
[ 3.567099] rtk_btusb: btusb_probe: usb_interface (ptrval), bInterfaceNumber 0, idVendor 0x0bda, idProduct 0x0000
[ 3.567107] rtk_btusb: get_fw_table_entry: Product id = 0x8771, fw table entry size 62
[ 3.567109] rtk_btusb: firmware_info_init: Auto suspend is disabled
[ 3.567116] rtk_btusb: btusb_probe: Check bt reset flag 0
[ 3.567118] rtk_btusb: load_firmware_info: Default lmp version = 0x8761, fw file name[rtl8761b_fw]
[ 3.568114] rtk_btusb: load_firmware_info: epatch_buf = vmalloc(fw->size, GFP_KERNEL)
[ 3.570729] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.570732] register card failed (-517)
[ 3.596941] [amp_driver] register cdev device major [246]
[ 3.596944] [amp_driver] setup cdevs device minor [0]
[ 3.597006] [amp_driver] create device sysfs [ampcore]
[ 3.597009] [amp_driver] amp_device_init ok
[ 3.597124] [amp_driver] amp_probe OK
[ 3.597278] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.597281] register card failed (-517)
[ 3.618384] [tsp kernel driver] register cdev device major [245]
[ 3.618388] [tsp kernel driver] setup cdevs device minor [0]
[ 3.618450] [tsp kernel driver] create device sysfs [tsp]
[ 3.618452] [tsp kernel driver] tsp_device_init ok
[ 3.618452] [tsp kernel driver] berlin_tsp_probe OK
[ 3.618609] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.618611] register card failed (-517)
[ 3.639250] [vpu kernel driver] vpu probe enter
[ 3.639253] [vpu kernel driver] find vpu device h1
[ 3.639274] [vpu kernel driver] request irq:18
[ 3.639277] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff]
[ 3.639371] [vpu kernel driver] vpu:h1 probe ok
[ 3.639526] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.639529] register card failed (-517)
[ 3.639562] [vpu kernel driver] vpu probe enter
[ 3.639564] [vpu kernel driver] find vpu device vxg
[ 3.639571] [vpu kernel driver] request irq:19
[ 3.639573] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff]
[ 3.639627] [vpu kernel driver] vpu:vxg probe ok
[ 3.639708] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.639710] register card failed (-517)
[ 3.660353] [zsp kernel driver] zsp probe enter
[ 3.660376] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff]
[ 3.660465] [zsp kernel driver] zsp:zsp probe ok
[ 3.660622] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.660625] register card failed (-517)
[ 3.859726] ueventd: Parsing file /ueventd.rc...
[ 3.865340] ueventd: Parsing file /vendor/ueventd.rc...
[ 3.871242] ueventd: Parsing file /odm/ueventd.rc...
[ 3.876402] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 3.886486] ueventd: Parsing file /ueventd.sequoia.rc...
[ 3.891989] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory
[ 4.086758] rtk_btusb: get_eversion: status 0, eversion 1
[ 4.090636] ueventd: Coldboot took 0.187 seconds
[ 4.110542] rtk_btusb: load_firmware_info: Default lmp_version 0x8761, project_id[14] 0x8761 -> match
[ 4.120545] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
U-Boot 2016.11 (Oct 14 2020 - 17:46:49 +0800)
Model: MARVELL BG5CT STB BOARD
DRAM: 2 GiB
Flash: SF: Detected MX25L12805 with page size 256 Bytes, erase size 64 KiB, total 16 MiB, mapped at 00000000f0000000
16 MiB
MMC: SDHCI: switch host to 1.8V !
sdhci@aa0000: 0
*** Warning - bad CRC, using default environment
In: uart@d000
Out: uart@d000
Err: uart@d000
fts: v4 loaded from 0x0000c000
Net: eth0: ethernet@f7b60000 [PRIME], eth1: ethernet@b90000
mvneta_gedll_set: f7ea0a18 = 40
VAS SKIP PHY CONN.
Eth auto-negotiation time out.
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin> use b2emmc
The defualt eMMC partition type on env is DOS
partition table is usb:eMMCimg/emmc_part_list, image list is usb:eMMCimg/emmc_image_list
starting USB...
USB0: Register 2000120 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
fatload usb 0:1 2000000 eMMCimg/emmc_part_list
reading eMMCimg/emmc_part_list
969 bytes read in 38 ms (24.4 KiB/s)
get_img: image ready. image_size=000003c9, image_addr=0000000002000000
The eMMC partition type on emmc_part_list is GPT
switch to partitions #0, OK
switch to partitions #0, OK
start to create partiton key_1st 16 1...Done.
start to create partiton key_2nd 0 1...Done.
start to create partiton fastboot_1st 0 7...Done.
start to create partiton fastboot_2nd 0 7...Done.
start to create partiton factory_setting 0 16...Done.
start to create partiton tzk_recovery 0 16...Done.
start to create partiton bl_recovery 0 16...Done.
start to create partiton recovery 0 32...Done.
start to create partiton tzk_normal 0 16...Done.
start to create partiton bl_normal 0 16...Done.
start to create partiton boot 0 32...Done.
start to create partiton dtbo 0 8...Done.
start to create partiton super 0 1656...Done.
start to create partiton fastlogo 0 16...Done.
start to create partiton vbmeta 0 4...Done.
start to create partiton vbmeta_system 0 4...Done.
start to create partiton misc 0 2...Done.
start to create partiton fts 0 4...Done.
start to create partiton frp 0 2...Done.
start to create partiton metadata 0 32...Done.
start to create partiton cache 0 984...Done.
start to create partiton btv_home 0 100...Done.
start to create partiton userdata 0 4100...Done.
Create partitions OK.
fatload usb 0:1 2000000 eMMCimg/emmc_image_list
reading eMMCimg/emmc_image_list
471 bytes read in 33 ms (13.7 KiB/s)
get_img: image ready. image_size=000001d7, image_addr=0000000002000000
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/bootloader.subimg to b1
###################################################################
fatload usb 0:1 2000000 eMMCimg/bootloader.subimg
reading eMMCimg/bootloader.subimg
166912 bytes read in 39 ms (4.1 MiB/s)
get_img: image ready. image_size=00028c00, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 97 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/bootloader.subimg to b2
###################################################################
fatload usb 0:1 2000000 eMMCimg/bootloader.subimg
reading eMMCimg/bootloader.subimg
166912 bytes read in 39 ms (4.1 MiB/s)
get_img: image ready. image_size=00028c00, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 95 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/key_1st.subimg to sd1
###################################################################
partation[1] name: key_1st
partation[1] start addr: 00008000 LBA, 01000000 Bytes
partation[1] size: 00000800 LBA, 00100000 Bytes
fatload usb 0:1 2000000 eMMCimg/key_1st.subimg
reading eMMCimg/key_1st.subimg
49152 bytes read in 38 ms (1.2 MiB/s)
get_img: image ready. image_size=0000c000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 90 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/key_2nd.subimg to sd2
###################################################################
partation[2] name: key_2nd
partation[2] start addr: 00008800 LBA, 01100000 Bytes
partation[2] size: 00000800 LBA, 00100000 Bytes
fatload usb 0:1 2000000 eMMCimg/key_2nd.subimg
reading eMMCimg/key_2nd.subimg
49152 bytes read in 38 ms (1.2 MiB/s)
get_img: image ready. image_size=0000c000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 90 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/fastboot_1st.subimg to sd3
###################################################################
partation[3] name: fastboot_1st
partation[3] start addr: 00009000 LBA, 01200000 Bytes
partation[3] size: 00003800 LBA, 00700000 Bytes
fatload usb 0:1 2000000 eMMCimg/fastboot_1st.subimg
reading eMMCimg/fastboot_1st.subimg
455744 bytes read in 46 ms (9.4 MiB/s)
get_img: image ready. image_size=0006f440, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 0006f600.
img2sd_impl: time elapse: 162 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/fastboot_2nd.subimg to sd4
###################################################################
partation[4] name: fastboot_2nd
partation[4] start addr: 0000c800 LBA, 01900000 Bytes
partation[4] size: 00003800 LBA, 00700000 Bytes
fatload usb 0:1 2000000 eMMCimg/fastboot_2nd.subimg
reading eMMCimg/fastboot_2nd.subimg
455744 bytes read in 58 ms (7.5 MiB/s)
get_img: image ready. image_size=0006f440, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 0006f600.
img2sd_impl: time elapse: 172 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/tzk_recovery.subimg to sd6
###################################################################
partation[6] name: tzk_recovery
partation[6] start addr: 00018000 LBA, 03000000 Bytes
partation[6] size: 00008000 LBA, 01000000 Bytes
fatload usb 0:1 2000000 eMMCimg/tzk_recovery.subimg
reading eMMCimg/tzk_recovery.subimg
574656 bytes read in 51 ms (10.7 MiB/s)
get_img: image ready. image_size=0008c4c0, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 0008c600.
img2sd_impl: time elapse: 182 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/bl_recovery.subimg to sd7
###################################################################
partation[7] name: bl_recovery
partation[7] start addr: 00020000 LBA, 04000000 Bytes
partation[7] size: 00008000 LBA, 01000000 Bytes
fatload usb 0:1 2000000 eMMCimg/bl_recovery.subimg
reading eMMCimg/bl_recovery.subimg
1215168 bytes read in 59 ms (19.6 MiB/s)
get_img: image ready. image_size=00128ac0, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 00128c00.
img2sd_impl: time elapse: 284 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/recovery.subimg to sd8
###################################################################
partation[8] name: recovery
partation[8] start addr: 00028000 LBA, 05000000 Bytes
partation[8] size: 00010000 LBA, 02000000 Bytes
fatload usb 0:1 2000000 eMMCimg/recovery.subimg
reading eMMCimg/recovery.subimg
33554432 bytes read in 390 ms (82.1 MiB/s)
get_img: image ready. image_size=02000000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 5302 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/tzk_normal.subimg to sd9
###################################################################
partation[9] name: tzk_normal
partation[9] start addr: 00038000 LBA, 07000000 Bytes
partation[9] size: 00008000 LBA, 01000000 Bytes
fatload usb 0:1 2000000 eMMCimg/tzk_normal.subimg
reading eMMCimg/tzk_normal.subimg
574656 bytes read in 51 ms (10.7 MiB/s)
get_img: image ready. image_size=0008c4c0, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 0008c600.
img2sd_impl: time elapse: 183 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/bl_normal.subimg to sd10
###################################################################
partation[10] name: bl_normal
partation[10] start addr: 00040000 LBA, 08000000 Bytes
partation[10] size: 00008000 LBA, 01000000 Bytes
fatload usb 0:1 2000000 eMMCimg/bl_normal.subimg
reading eMMCimg/bl_normal.subimg
1215168 bytes read in 59 ms (19.6 MiB/s)
get_img: image ready. image_size=00128ac0, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: round image size to 00128c00.
img2sd_impl: time elapse: 284 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/boot.subimg to sd11
###################################################################
partation[11] name: boot
partation[11] start addr: 00048000 LBA, 09000000 Bytes
partation[11] size: 00010000 LBA, 02000000 Bytes
fatload usb 0:1 2000000 eMMCimg/boot.subimg
reading eMMCimg/boot.subimg
33554432 bytes read in 391 ms (81.8 MiB/s)
get_img: image ready. image_size=02000000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 5298 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/dtbo.subimg to sd12
###################################################################
partation[12] name: dtbo
partation[12] start addr: 00058000 LBA, 0b000000 Bytes
partation[12] size: 00004000 LBA, 00800000 Bytes
fatload usb 0:1 2000000 eMMCimg/dtbo.subimg
reading eMMCimg/dtbo.subimg
8388608 bytes read in 117 ms (68.4 MiB/s)
get_img: image ready. image_size=00800000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 1374 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/super.subimg to sd13
###################################################################
partation[13] name: super
partation[13] start addr: 0005c000 LBA, 0b800000 Bytes
partation[13] size: 0033c000 LBA, 67800000 Bytes
fatload usb 0:1 2000000 eMMCimg/super.subimg
reading eMMCimg/super.subimg
1541424848 bytes read in 16176 ms (90.9 MiB/s)
get_img: image ready. image_size=5be046d0, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: image is a sparse format.
Flashing Sparse Image
........ wrote 1541648384 bytes to 'sd13'
img2sd_impl: time elapse: 239955 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/fastlogo.subimg to sd14
###################################################################
partation[14] name: fastlogo
partation[14] start addr: 00398000 LBA, 73000000 Bytes
partation[14] size: 00008000 LBA, 01000000 Bytes
fatload usb 0:1 2000000 eMMCimg/fastlogo.subimg
reading eMMCimg/fastlogo.subimg
6605824 bytes read in 114 ms (55.3 MiB/s)
get_img: image ready. image_size=0064cc00, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 1116 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/vbmeta.subimg to sd15
###################################################################
partation[15] name: vbmeta
partation[15] start addr: 003a0000 LBA, 74000000 Bytes
partation[15] size: 00002000 LBA, 00400000 Bytes
fatload usb 0:1 2000000 eMMCimg/vbmeta.subimg
reading eMMCimg/vbmeta.subimg
8192 bytes read in 33 ms (242.2 KiB/s)
get_img: image ready. image_size=00002000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 78 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/vbmeta_system.subimg to sd16
###################################################################
partation[16] name: vbmeta_system
partation[16] start addr: 003a2000 LBA, 74400000 Bytes
partation[16] size: 00002000 LBA, 00400000 Bytes
fatload usb 0:1 2000000 eMMCimg/vbmeta_system.subimg
reading eMMCimg/vbmeta_system.subimg
4096 bytes read in 33 ms (121.1 KiB/s)
get_img: image ready. image_size=00001000, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: time elapse: 80 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/erase to sd17
###################################################################
partation[17] name: misc
partation[17] start addr: 003a4000 LBA, 74800000 Bytes
partation[17] size: 00001000 LBA, 00200000 Bytes
img2sd_impl: time elapse: 20 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/erase to sd18
###################################################################
partation[18] name: fts
partation[18] start addr: 003a5000 LBA, 74a00000 Bytes
partation[18] size: 00002000 LBA, 00400000 Bytes
img2sd_impl: time elapse: 16 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/erase to sd19
###################################################################
partation[19] name: frp
partation[19] start addr: 003a7000 LBA, 74e00000 Bytes
partation[19] size: 00001000 LBA, 00200000 Bytes
img2sd_impl: time elapse: 16 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/format to sd20
###################################################################
partation[20] name: metadata
partation[20] start addr: 003a8000 LBA, 75000000 Bytes
partation[20] size: 00010000 LBA, 02000000 Bytes
empty image, do format ext4fs
make_ext4fs: dev=000000006feca7a0, start=0x3a8000size=0x10000
Creating filesystem with parameters:
Size: 33554432
Block size: 4096
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 8192
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/2048 inodes and 1166/8192 blocks
img2sd_impl: time elapse: 419 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/format to sd21
###################################################################
partation[21] name: cache
partation[21] start addr: 003b8000 LBA, 77000000 Bytes
partation[21] size: 001ec000 LBA, 3d800000 Bytes
empty image, do format ext4fs
make_ext4fs: dev=000000006feca7a0, start=0x3b8000size=0x1ec000
Creating filesystem with parameters:
Size: 1031798784
Block size: 4096
Blocks per group: 32768
Inodes per group: 7872
Inode size: 256
Journal blocks: 3936
Label:
Blocks: 251904
Block groups: 8
Reserved block group size: 63
Created filesystem with 11/62976 inodes and 8216/251904 blocks
img2sd_impl: time elapse: 1463 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/format to sd22
###################################################################
partation[22] name: btv_home
partation[22] start addr: 005a4000 LBA, b4800000 Bytes
partation[22] size: 00032000 LBA, 06400000 Bytes
empty image, do format ext4fs
make_ext4fs: dev=000000006feca7a0, start=0x5a4000size=0x32000
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
img2sd_impl: time elapse: 502 ms
img2sd_impl: write image data success!
###################################################################
CMD_PART: 2 start to write image usb:eMMCimg/userdata.subimg to sd23
###################################################################
partation[23] name: userdata
partation[23] start addr: 005d6000 LBA, bac00000 Bytes
partation[23] size: 00802000 LBA, 100400000 Bytes
fatload usb 0:1 2000000 eMMCimg/userdata.subimg
reading eMMCimg/userdata.subimg
291132 bytes read in 55 ms (5 MiB/s)
get_img: image ready. image_size=0004713c, image_addr=0000000002000000
verify=yes, will do verification
img2sd_impl: image is a sparse format.
Flashing Sparse Image
........ wrote 290816 bytes to 'sd23'
img2sd_impl: time elapse: 260 ms
img2sd_impl: write image data success!
img2sd import excute done
Burn images OK.
Set boot partition 1 to be boot part OK.
list2emmc success.
time elapse 260698 ms
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin>
Berlin> reboot
Unknown command 'reboot' - try 'help'
Berlin> rest set
resetting ...
�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
bcm_load_next_img error!�init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
RKtEKsm_:ID r e(blyetase[e0 i:7d] 0) x=d 95c9ca210700,0 c00o0m0m0it05 3tid
meU WLeT d (Abyprt e[240 :713]):1 7 :5 5 = 2 04b1994 -90fa706090
c9483d
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_AMP_power, i2c_master_write_and_read fail.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
init_led_devices, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2)
tx abort source:0x1
bit0:(7-bit addressing) address not ACKed by any slave
set_LED9_color, i2c_master_write_and_read fail.
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
|
